3x44MM THROTTLE CABLE                     $69
46MM CARBS- set of 3                       $595    48MM CARBS - set of 3                       $850           
New Flatslides 50 to 56mm $595ea
 

3-44mm manifold                                     $225
3-manifold kit ported to 46 or 48mm   $350                                                            
Available custom piston sizes:  
 96mm w/24mm pin $199
 93mm w/24mm pin $199
 91mm w/20mm pin $199
 85mm w/20mm pin $189
 82.5mm w/20mm pin $189
 70mm w/18mm pin $169 BIG BORE 670 for zrt600                                              

OFFSET KEYS                                         $17

QACA- QUICK ADJUST CAM ARMS
#1-#4 (3 arm)                                          $169
Custom ground 3-arm                             $199
#1-#4 (4 arm)                                          $219
Custom ground 4-arm                             $249            

CLUTCH SPIDER SHIM KIT                        For adjusting belt grip or engagement rpm for most Comet, Polaris and Arctic drive clutches                   $20

                      
Custom oval racing HELIX         $75                                

UltraLight Windage Plates.1/3 the weight of the stock plates. $69

MACHINE SHOP SERVICES

NEW!  Driven Clutch Mod.
Lightening, Trueing, & Balancing for Arctic Reverse Cam Clutches.     Removes over 1.5 lbs of rotating weight.
(This is one of the secrets for our dominating hole-shots!)  $199.00



CLYINDER PLATING                             $179
2-3 WEEKS IF NO PROBLEMS

BORE CARBS (EACH)
ROUNDSLIDE 38MM-39.2MM
ASSEMBLED                                          $60    
DISASSEMBLED                                     $50    RACK FLATSLIDES 38MM-40.5MM
ASSEMBLED                                           $85
DISASSEMBLED                                      $60

800/900/1000

BIG TRIPLE CASE PORTING               $1000 PRED. RACE 1000-1500
(SEND TOP HALF OF CASE)

 FULL RACE PORTED for OEM cyls $750

LAKE RACE CASE PORTING $500

LAKE RACE PORTING 1000 T-CAT CYLINDERS AND HEADS (12+ HP)
$800

LAKE RACE PORTING F8/M8 or F1000 CYLINDERS $575 (7+ HP)

MACHINING  BALANCE SHAFT (BIG TRIPLE) FOR RACING ONLY. removes almost 7 lbs. of rotating weight.
$95

DYNO-TESTING (ARCTIC CATS ONLY)
$400 (MINIMUM 6 RUNS)


There really is no limit to the machine shop services we can offer.  With our state of the art CNC machines and years of fabrication and tuning experience, we have you covered for whatever you might need.  If you don't see what you're looking for on the list.  Please give us a call.